EDCS Attribute Codes: F

Label: EDCS_AC_MARITIME_CONSTRUCTION_TYPE

Name: Maritime Construction Type

Definition:
Differentiates the type of construction used for a maritime object.

AC: FAC_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FAC__UNKNOWN Unknown
1 SE_PROP_VAL_FAC__OPEN_PILINGS Open Pilings
2 SE_PROP_VAL_FAC__GENERAL_SOLID_FACE General Solid Face
3 SE_PROP_VAL_FAC__BOULDER_AND_FILL Boulder and Fill
4 SE_PROP_VAL_FAC__MASONARY Masonary
997 SE_PROP_VAL_FAC__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FAC__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FAC__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.1


Label: EDCS_AC_FRONT_AND_AXIS_REFERENCE

Name: Front and Axis Reference

Definition:
Associates the front or long axis of the attributed structure to one of the axes of an LSR coordinate system, where the "front" may be indicated by the presence of the primary entrance to the structure. For example, observation of a structure may show the primary entrance to be on the positive x axis of the LSR coordinate system originating from the centre of the structure, and in this case, the enumerant would be POSITIVE_X.

AC: FARF

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FARF_UNKNOWN Unknown
1 SE_PROP_VAL_FARF_POSITIVE_X Positive X
2 SE_PROP_VAL_FARF_NEGATIVE_X Negative X
3 SE_PROP_VAL_FARF_POSITIVE_Y Positive Y
4 SE_PROP_VAL_FARF_NEGATIVE_Y Negative Y
5 SE_PROP_VAL_FARF_POSITIVE_Z Positive Z
6 SE_PROP_VAL_FARF_NEGATIVE_Z Negative Z
995 SE_PROP_VAL_FARF_NO_FRONT No Front
997 SE_PROP_VAL_FARF_DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FARF_NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded

Units: EDCS_UNITS_ENUMERATION

Source: Associate inputs to support EDCS Implementation Release 2.8


Label: EDCS_AC_FEATURE_ASPECT

Name: Object Aspect

Definition:
Portion or aspect of the object or object-associated terrain, e.g. the shoulder or a road, the banks of a river, or the roof eaves of a building.

AC: FAS_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FAS__DATA_MISSING_OR_UNKNOWN Data Missing / Unknown
1 SE_PROP_VAL_FAS__BODY Body
2 SE_PROP_VAL_FAS__SHOULDERS Shoulders
3 SE_PROP_VAL_FAS__LEFT_SHOULDER Left Shoulder
4 SE_PROP_VAL_FAS__RIGHT_SHOULDER Right Shoulder
5 SE_PROP_VAL_FAS__EMBANKMENTS Embankments
6 SE_PROP_VAL_FAS__LEFT_EMBANKMENT Left Embankment
7 SE_PROP_VAL_FAS__RIGHT_EMBANKMENT Right Embankment
8 SE_PROP_VAL_FAS__CUTS Cuts
9 SE_PROP_VAL_FAS__LEFT_CUT Left Cut
10 SE_PROP_VAL_FAS__RIGHT_CUT Right Cut
11 SE_PROP_VAL_FAS__EMBANKMENTS_OR_CUTS_TRANSITION_REGIONS Embankments or Cuts (Transition Regions)
12 SE_PROP_VAL_FAS__LEFT_EMBANKMENT_OR_CUT_LEFT_TRANSITION_REGION Left Embankment or Cut (Left Transition Region)
13 SE_PROP_VAL_FAS__RIGHT_EMBANKMENT_OR_CUT_RIGHT_TRANSITION_REGION Right Embankment or Cut (Right Transition Region)
997 SE_PROP_VAL_FAS__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FAS__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded

Units: EDCS_UNITS_ENUMERATION

Source: Associate inputs to support EDCS Implementation Release 2.5


Label: EDCS_AC_FREQUENCY_BAND_CENTER

Name: Frequency, Band Center

Definition:
The centre frequency of a frequency band for which acoustic data were measured.

AC: FBC_

Recommended Data Type: SE_FLOAT32

Possible Enumerators: None

Recommended Maximum Value: 99999.99

Recommended Minimum Value: 1.00

Recommended Significant Digits: 7

Recommended Tolerance: .01

Units: EDCS_UNITS_HERTZ

Source: JMCDM inputs 8-11-98


Label: EDCS_AC_FOG_COVER_FRACTION

Name: Fog Cover, Fraction

Definition:
The areal fraction of a region that is covered by ground fog, as seen from above. The following interpretations may be applied: 1/4: Small, 2/4: Medium, 3/4: Large, 4/4: Complete.

AC: FCF_

Recommended Data Type: SE_FLOAT32

Possible Enumerators: None

Recommended Maximum Value: 100

Recommended Minimum Value: 0

Recommended Significant Digits: 3

Recommended Tolerance: 1

Units: EDCS_UNITS_UNITLESS

Source: Associate inputs to support EDCS Implementation Release 2.5.3


Label: EDCS_AC_FERRY_CROSSING_LENGTH

Name: Ferry Crossing Length

Definition:
Length of crossing between shore points.

AC: FCL_

Recommended Data Type: SE_INT16

Possible Enumerators: None

Recommended Maximum Value: +32767

Recommended Minimum Value: -32767

Recommended Significant Digits: Not Applicable

Recommended Tolerance: 1

Units: EDCS_UNITS_METER

Source: DIGEST Edition 2.0


Label: EDCS_AC_FEATURE_CONFIGURATION

Name: Object Configuration

Definition:
Configuration of the object.

AC: FCO_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FCO__UNKNOWN Unknown
1 SE_PROP_VAL_FCO__DISPERSED Dispersed
2 SE_PROP_VAL_FCO__MULTIPLE Multiple
3 SE_PROP_VAL_FCO__SINGLE Single
4 SE_PROP_VAL_FCO__INCLINED Inclined
5 SE_PROP_VAL_FCO__DIVIDED_SAME_WIDTHS Divided, Same Widths
6 SE_PROP_VAL_FCO__DIVIDED_DIFFERENT_WIDTHS Divided, Different Widths
7 SE_PROP_VAL_FCO__NON_DIVIDED Non-divided
8 SE_PROP_VAL_FCO__POORLY_DEFINED Poorly Defined
9 SE_PROP_VAL_FCO__WELL_DEFINED Well-defined
11 SE_PROP_VAL_FCO__DOUBLE Double
12 SE_PROP_VAL_FCO__JUXTAPOSITION Juxtaposition
997 SE_PROP_VAL_FCO__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FCO__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FCO__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_FERRY_CROSSING_TIMES

Name: Ferry Crossing Times

Definition:
The usual time taken for a ferry crossing, including typical loading and unloading times.

AC: FCT_

Recommended Data Type: SE_INT16

Possible Enumerators: None

Recommended Maximum Value: +32767

Recommended Minimum Value: -32767

Recommended Significant Digits: Not Applicable

Recommended Tolerance: 1

Units: EDCS_UNITS_MINUTE

Source: DIGEST Edition 2.0


Label: EDCS_AC_FOG_DETECTOR

Name: Fog Detector

Definition:
Indicates whether or not a fog detector light is attached to, or connected with the object.

AC: FDT_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FDT__UNKNOWN Unknown
1 SE_PROP_VAL_FDT__FOG_DETECTOR_LIGHT_PRESENT Fog Detector Light Present
2 SE_PROP_VAL_FDT__FOG_DETECTOR_LIGHT_ABSENT Fog Detector Light Absent
997 SE_PROP_VAL_FDT__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FDT__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FDT__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0a


Label: EDCS_AC_FEATURE_ELEMENT_ORIENTATION

Name: Object Element Orientation

Definition:
The angle, measured in a clockwise direction, between planetary geodetic north and the predominant linear pattern of the elements within the object.

AC: FEO_

Recommended Data Type: SE_INT16

Possible Enumerators: None

Recommended Maximum Value: 359

Recommended Minimum Value: 0

Recommended Significant Digits: 3

Recommended Tolerance: 1

Units: EDCS_UNITS_DEGREE_ARC

Source: DIGEST Edition 2.0


Label: EDCS_AC_FERRY_TYPE

Name: Ferry Type

Definition:
Indicates the maneuverability of a ferry vessel.

AC: FER_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FER__UNKNOWN Unknown
1 SE_PROP_VAL_FER__WITH_CABLES_OR_CHAINS With Cables / Chains
2 SE_PROP_VAL_FER__WITHOUT_CABLES_OR_CHAINS Without Cables / Chains
3 SE_PROP_VAL_FER__ICE_FERRY Ice Ferry
997 SE_PROP_VAL_FER__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FER__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FER__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_FUEL_FACILITIES_AVAILABLE

Name: Fuel Facilities Available

Definition:
Fuel facilities available at or in the near vicinity.

AC: FFA_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FFA__UNKNOWN Unknown
1 SE_PROP_VAL_FFA__GASOLINE Gasoline
2 SE_PROP_VAL_FFA__AVIATION_FUEL Aviation Fuel
3 SE_PROP_VAL_FFA__KEROSENE Kerosene
4 SE_PROP_VAL_FFA__WATER Water
5 SE_PROP_VAL_FFA__DIESEL Diesel
6 SE_PROP_VAL_FFA__COAL Coal
7 SE_PROP_VAL_FFA__OIL Oil
8 SE_PROP_VAL_FFA__LUBRICANTS Lubricants
9 SE_PROP_VAL_FFA__METHANE Methane
10 SE_PROP_VAL_FFA__SPECIAL Special
11 SE_PROP_VAL_FFA__LPG Liquid Propane Gas (LPG)
12 SE_PROP_VAL_FFA__COMRESSED_NATURAL_GAS_CNG Compressed Natural Gas (CNG)
13 SE_PROP_VAL_FFA__BUTANE Butane
14 SE_PROP_VAL_FFA__ETHANOL Ethanol
995 SE_PROP_VAL_FFA__NONE None
997 SE_PROP_VAL_FFA__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FFA__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FFA__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_FISHING_FACILITY_CLASSIFICATION

Name: Fishing Facility Classification

Definition:
Encodes the various types of fishing facilities.

AC: FFC_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FFC__UNDEFINED Undefined
1 SE_PROP_VAL_FFC__FISHING_STAKE Fishing Stake
2 SE_PROP_VAL_FFC__FISH_TRAP Fish Trap
3 SE_PROP_VAL_FFC__FISH_WEIR Fish Weir
4 SE_PROP_VAL_FFC__TUNNY_OR_TUNA_NET Tunny / Tuna net
997 SE_PROP_VAL_FFC__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FFC__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FFC__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_HARBOR_FACILITY_CLASSIFICATION

Name: Harbour Facility Classification

Definition:
Tabulates the kind of operation/service.

AC: FHC_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FHC__UNDEFINED Undefined
1 SE_PROP_VAL_FHC__RO_RO_TERMINAL_ROLL_ON_ROLL_OFF Ro-Ro Terminal (Roll on, Roll off)
2 SE_PROP_VAL_FHC__TIMBER_YARD Timber Yard
3 SE_PROP_VAL_FHC__FERRY_TERMINAL Ferry Terminal
4 SE_PROP_VAL_FHC__FISHING_HARBOR Fishing Harbor
5 SE_PROP_VAL_FHC__YACHT_HARBOR_OR_MARINA Yacht Harbor / Marina
6 SE_PROP_VAL_FHC__NAVAL_BASE Naval Base
7 SE_PROP_VAL_FHC__TANKER_TERMINAL Tanker Terminal
8 SE_PROP_VAL_FHC__PASSENGER_TERMINAL Passenger Terminal
9 SE_PROP_VAL_FHC__SHIPYARD Shipyard
10 SE_PROP_VAL_FHC__CONTAINER_TERMINAL Container Terminal
11 SE_PROP_VAL_FHC__BULK_TERMINAL Bulk Terminal
997 SE_PROP_VAL_FHC__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FHC__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FHC__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_FREEZING_HEIGHT

Name: Freezing Height (Altitude)

Definition:
The lowest height above Mean Sea Level (MSL) at which the air temperature drops below zero degrees Celsius.

AC: FHT_

Recommended Data Type: SE_FLOAT32

Possible Enumerators: None

Recommended Maximum Value: 100000

Recommended Minimum Value: 1

Recommended Significant Digits: 6

Recommended Tolerance: 1

Units: EDCS_UNITS_METER

Source: Associate inputs to support EDCS Implementation Release 2.5.3


Label: EDCS_AC_FLIGHT_LEVEL_1

Name: Flight Level, Minimum

Definition:
A minimum surface of constant atmospheric pressure which is related to a specific pressure datum, (1,013.2 hectopascal (hPa) or 29.92 inches) and is separated from the consecutive flight levels by a pressure interval corresponding to 500 feet (152.4 m.).

AC: FL1_

Recommended Data Type: SE_INT16

Possible Enumerators: None

Recommended Maximum Value: +32767

Recommended Minimum Value: -32767

Recommended Significant Digits: Not Applicable

Recommended Tolerance: 1

Units: EDCS_UNITS_FOOT

Source: DIGEST Edition 2.0


Label: EDCS_AC_FLIGHT_LEVEL_2

Name: Flight Level, Maximum

Definition:
A maximum surface of constant atmospheric pressure which is related to a specific pressure datum, (1,013.2 hectopascal (hPa) or 29.92 inches) and is separated from the consecutive flight levels by a pressure interval corresponding to 500 feet (152.4 m.).

AC: FL2_

Recommended Data Type: SE_INT16

Possible Enumerators: None

Recommended Maximum Value: +32767

Recommended Minimum Value: -32767

Recommended Significant Digits: Not Applicable

Recommended Tolerance: 1

Units: EDCS_UNITS_FOOT

Source: DIGEST Edition 2.0


Label: EDCS_AC_FLOODLIT_ILLUMINATION

Name: Floodlit Illumination

Definition:
Indication of the presence of floodlighting to illuminate the structure of a light.

AC: FLT_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FLT__UNKNOWN Unknown
1 SE_PROP_VAL_FLT__FLOODLIGHT Floodlit
2 SE_PROP_VAL_FLT__NOT_LOODLIGHT Not Floodlit
997 SE_PROP_VAL_FLT__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FLT__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FLT__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0a


Label: EDCS_AC_TYPE_OF_FONT

Name: Type of Font

Definition:
Font used to display objects identified as NAMED_LOCATION or TEXT_DESCRIPTION.

AC: FON_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FON__UNKNOWN Unknown
1 SE_PROP_VAL_FON__MACHINE_DEFAULT Machine Default

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0a


Label: EDCS_AC_FOG_PROBABILITY

Name: Fog, Probability

Definition:
The probability of the occurrence of fog.

AC: FPR_

Recommended Data Type: SE_INT8

Possible Enumerators: None

Recommended Maximum Value: 100

Recommended Minimum Value: 0

Recommended Significant Digits: 3

Recommended Tolerance: 1

Units: EDCS_UNITS_UNITLESS

Source: JMCDM inputs 8-11-98


Label: EDCS_AC_FREQUENCY_OF_SIGNAL

Name: Frequency of Signal

Definition:
Audio, electromagnetic, or light wave frequency.

AC: FRQ_

Recommended Data Type: SE_UINT32

Possible Enumerators: None

Recommended Maximum Value: +4164895295

Recommended Minimum Value: 0

Recommended Significant Digits: Not Applicable

Recommended Tolerance: 1

Units: EDCS_UNITS_HERTZ

Source: DIGEST Edition 2.0


Label: EDCS_AC_FIRING_RANGE_TYPE

Name: Firing Range Type

Definition:
Type of firing range.

AC: FRT_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FRT__UNKNOWN Unknown
1 SE_PROP_VAL_FRT__RIFLE_OR_SMALL_ARMS Rifle / Small Arms
2 SE_PROP_VAL_FRT__TANK Tank
3 SE_PROP_VAL_FRT__ARTILLERY Artillery
4 SE_PROP_VAL_FRT__GRENADE Grenade
5 SE_PROP_VAL_FRT__DEMOLITION_AREA Demolition Area
6 SE_PROP_VAL_FRT__IMPACT_AREA Impact Area
997 SE_PROP_VAL_FRT__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FRT__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FRT__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_FARMING_TYPE_CATEGORY

Name: Farming Type Category

Definition:
Type of field pattern, or use.

AC: FTC_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FTC__UNKNOWN Unknown
1 SE_PROP_VAL_FTC__SLASH_AND_BURN_SHIFTING_CULTIVATION Slash and Burn - Shifting Cultivation
2 SE_PROP_VAL_FTC__PERMANENT_FIELD Permanent Field
3 SE_PROP_VAL_FTC__TERRACED Terraced
4 SE_PROP_VAL_FTC__DITCH_IRRIGATION Ditch Irrigation
5 SE_PROP_VAL_FTC__GRAZING Grazing
6 SE_PROP_VAL_FTC__REGULAR_PLANTING_PATTERN Regular (planting pattern)
7 SE_PROP_VAL_FTC__LINEAR_PLANTING_PATTERN Linear (planting pattern)
8 SE_PROP_VAL_FTC__SHIFTING_CULTIVATION_OR_CROP_ROTATION Crop Rotation
9 SE_PROP_VAL_FTC__NOT_APPLICABLE Not Applicable
98 SE_PROP_VAL_FTC__TYPE_OF_FIELD_PATTERN Type of Field Pattern
997 SE_PROP_VAL_FTC__DATA_WITHHELD Data Withheld
999 SE_PROP_VAL_FTC__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_FOG_THICKNESS

Name: Fog, Thickness

Definition:
The height of a fog bank relative to the local ground surface. The fog base is assumed to be at ground level.

AC: FTH_

Recommended Data Type: SE_FLOAT32

Possible Enumerators: None

Recommended Maximum Value: 500

Recommended Minimum Value: 0

Recommended Significant Digits: 3

Recommended Tolerance: 1

Units: EDCS_UNITS_METER

Source: Associate inputs to support EDCS Implementation Release 2.5.3


Label: EDCS_AC_FENCE_TYPE_INDICATOR

Name: Fence Type Indicator

Definition:
Type of fence.

AC: FTI_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FTI__DATA_MISSING_OR_UNKNOWN Data Missing / Unknown
1 SE_PROP_VAL_FTI__METAL Metal
2 SE_PROP_VAL_FTI__WOOD Wood
3 SE_PROP_VAL_FTI__STONE Stone
4 SE_PROP_VAL_FTI__ROCK Rock
5 SE_PROP_VAL_FTI__BARBED_WIRE Barbed Wire
6 SE_PROP_VAL_FTI__CHAIN_LINK Chain Link
7 SE_PROP_VAL_FTI__CHAIN_LINK_WITH_BARBS_OR_WIRE_ABOVE Chain Link with Coiled Barbs or Razor Wire, Above
8 SE_PROP_VAL_FTI__CHAIN_LINK_WITH_SLATS Chain Link with Slats (Sand Fence)
9 SE_PROP_VAL_FTI__MINEFIELD_PERIMETER Minefield Perimeter
10 SE_PROP_VAL_FTI__MINEFIELD_LANE Minefield Lane
997 SE_PROP_VAL_FTI__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FTI__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FTI__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Label: EDCS_AC_FABRICATION_TYPE

Name: Fabrication Type

Definition:
Denotes the type of fabrication industry as light or heavy. Light fabrication industries are characterized by light steel or wood frame buildings and lack heavy equipment. Heavy fabrication industries are characterized by large heavy steel frame buildings and may utilize large cranes for heavy lifting.

AC: FTP_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FTP__UNKNOWN Unknown
1 SE_PROP_VAL_FTP__LIGHT_FABRICATION Light Fabrication
2 SE_PROP_VAL_FTP__HEAVY_FABRICATION Heavy Fabrication
997 SE_PROP_VAL_FTP__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FTP__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FTP__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0a


Label: EDCS_AC_FEATURE_RATE

Name: Object Rate

Definition:
A quantified rate associated with the object (e.g., cars crossing the object identified as BRIDGE_OR_OVERPASS_OR_VIADUCT). Units will be qualified using a structured text approach (e.g. 100(cars)[crossing bridge per hour] where the type of unit is in parentheses ( ) and a unit qualifier is in brackets [ ].

AC: FTR_

Recommended Data Type: SE_STR_STRING

Possible Enumerators: None

Recommended Maximum Value: Not Applicable

Recommended Minimum Value: Not Applicable

Recommended Significant Digits: 80

Recommended Tolerance: Not Applicable

Units: EDCS_UNITS_UNITS_NOT_APPLICABLE

Source: DIGEST Edition 2.0


Label: EDCS_AC_FUSE_TYPE

Name: Fuse Type

Definition:
The type of fuse used in a munition.

AC: FUT_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FUT__UNKNOWN Unknown
1 SE_PROP_VAL_FUT__PRESSURE Pressure
2 SE_PROP_VAL_FUT__TILT_ROD Tilt Rod
3 SE_PROP_VAL_FUT__MAGNETIC Magnetic
4 SE_PROP_VAL_FUT__INFRARED Infrared
5 SE_PROP_VAL_FUT__TRIP_WIRE Trip Wire
6 SE_PROP_VAL_FUT__SEISMIC Seismic
997 SE_PROP_VAL_FUT__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FUT__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FUT__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: Associate inputs to support EDCS Implementation Release 2.7


Label: EDCS_AC_FEATURE_VERTICAL_DISPLACEMENT

Name: Object Vertical Displacement

Definition:
Vertical distance measured from the lowest point of the base of the object (downhill side/downstream side) to the prevailing terrain surface.

AC: FVD_

Recommended Data Type: SE_FLOAT32

Possible Enumerators: None

Recommended Maximum Value: Not Applicable

Recommended Minimum Value: 0

Recommended Significant Digits: Not Applicable

Recommended Tolerance: .1

Units: EDCS_UNITS_METER

Source: Associate inputs to support EDCS Implementation Release 2.5


Label: EDCS_AC_FEATURE_VERTICAL_ORIENTATION

Name: Object Vertical Orientation

Definition:
Describes the orientation of the usual axis of the object relative to the vertical.

AC: FVO_

Recommended Data Type: EDCS_AC_ENUM_VALUE

Possible Enumerators:

0 SE_PROP_VAL_FVO__UNKNOWN Unknown
1 SE_PROP_VAL_FVO__UPRIGHT Upright
2 SE_PROP_VAL_FVO__ON_SIDE On side
3 SE_PROP_VAL_FVO__LEANING Leaning
4 SE_PROP_VAL_FVO__INVERTED Inverted
5 SE_PROP_VAL_FVO__HORIZONTAL Horizontal
997 SE_PROP_VAL_FVO__DATA_WITHHELD Data Withheld
998 SE_PROP_VAL_FVO__NOT_APPLICABLE_OR_POINT_EXCLUDED Not Applicable / Point Excluded
999 SE_PROP_VAL_FVO__OTHER Other

Units: EDCS_UNITS_ENUMERATION

Source: DIGEST Edition 2.0


Prev:AC_E.htm Next:AC_G.htm Up:Index